Part no. RV250TE
50 to 244 CFM (0.4 in. w.g.)
THE FUTURE OF FRESH AIR
The whole home ventilation system is a centerpiece of today’s energy-efficient homes. Broan introduces its new HE Series that combines the best performance with the best energy efficiency to provide fresher, purer air in your home at a lower overall operating cost. That’s Pure Efficiency.
The ERV250 ECM is the perfect solution for mid to large size homes in need for the most energy-efficient ventilation solution.
Key features:
- Up to 244 CFM at 0.4 in. w.g.
- High efficiency energy recovery core with a sensible recovery efficiency of 75% at 32°F and 65% at -13°F
- ECM* motors
- Minimal power consumption of 18 W and 3.6 CFM/Watt at 64 CFM
- Merv 6 grade filters and optional HEPA filtration
- Electronic balancing and no balancing dampers
- Included wall mounting bracket.
*Electronically Commutated Motor.
REPAIRS AND MAINTENANCE
The ERV250 ECM high output ECM motors are permanently lubricated. The electronic circuit board eliminates electromechanical parts, reducing repair time to a minimum.
WARRANTY
The ERV250 ECM is protected by a 5-year warranty on parts only, except for the energy recovery core, which is covered by a 10-year warranty, with the original proof of purchase.
ENERGY RECOVERY VENTILATOR
Controls
The exclusive VT9W main wall control, sold separately, is the only compatible wall control to be used with the ERV250 ECM. At installation, use the VT9W main control to perform electronic balancing, without balancing dampers! Optional auxiliary controls also available; for more details, refer to the User Guide - Main and auxiliary wall controls available at www.broan-nutone.com.
Option
HEPA Filter 21996
Additional 0.3 in. w.g. static pressure at highest speed to be considered. Refer to the HEPA filter instructions for more details.
Defrosting System
Use the VT9W to choose one of the 3 defrost modes available for recirculation, according to your needs:
- Standard (factory set regular mode)
- Plus (extended defrost for colder areas)
- Discretion (keeps the same speed when performing defrost as performing ventilation)
Requirements and standards
- Complies with the UL 1812 requirements regulating the installation of Energy Recovery Ventilators
- Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
- Complies with CSA F326 requirements regulating the installation of Energy Recovery Ventilators
- Technical data was obtained from published results of tests relating to CSA C439 Standards
- HVI certified
Ventilation Performance
Energy Performance
*Data not certified by HVI.
NOTE: All specifications are subject to change without notice.
Fan curves according to speed
- Model: ERV250 ECM
- Part Number: ERV250TE
- Total Assembled Weight (including polymerized paper core): 96 lb. (44 kg)
- Oval shaped ports; fit 6” round ducts
- Drains: Optional
- Core Filters: 2 washable Merv 6 filters
- Housing: Pre-painted steel
- Optional HEPA Filter
- Insulation: Expanded polystyrene
- Mounting: Suspension by chains and springs or wall bracket system
- Supply and Exhaust Blower Motors:
- Two ECM motors
- Protection type: Thermally protected
- VT9W wall control offering 5 manual modes: Recirculation, 20 MIN/H, Continuous, Smart and Turbo. VT9W is sold separately
- Energy Recovery Core:
- Dimensions: 12” x 12” x 16.6”
(30.5 cm x 30.5 cm x 42.2 cm) - Exchange surface: 168 ft.² (15.6 m²)
- Weight: 14 lb. (6.4 kg)
- Type: Cross flow
- Material: Polymerized paper
- Warranty: 10 years
- Dimensions: 12” x 12” x 16.6”
- Unit Electrical Characteristics:
- Volts: 120
- Frequency: 60 Hz
- Amps: 2.2
- Watts: 135